ISC Dual Channel Isolated Signal Conditioner/Converter
A Programmable & user-friendly converter, was born.
ISC Dual Channel Isolated Signal Conditioner/Converter
Feature: Programmable for various input signals and
measuring ranges. Configurable without Power Connected. Din Rail Mount Inputs:User configurable for Resistance thermometer (PT100 / RTD) Thermocouple (J,K,T,E,B,R,S,N,C) Also available for Voltage, Current and mV Outputs : 3 models are available
1.
2.
3.
ISC-S : Single Analog Output(OUT 1): 4 ~20 mA ?0~10VDC
OUTPUT1=PV1
ISC-D: Dual Analog Outputs: 4 ~20 mA ?0~10VDC
OUTPUT1=PV1 ; OUTPUT2=PV2
ISC-C : One Analog Output(OUT1) 4 ~20 mA ? 0~10VDC with RS485 com port:MODBUS-RTU (OUT2); OUTPUT1=PV1
High accuracy in total ambient temperature range. Sensor break fault signal level pre-setable.
The Din Rail converter is user configurable using our software on your PC/notebook or our dedicated handheld programmer. The easy to use software is available free from your supplier or can be downloaded from our web site and should be used in conjunction with the URC-1020 USB cable which incorporates an interface converter necessary for communications.The ISC converter can be configured without any loop or power connected making it easy to configure in the workshop before installation.
Specification:
Input
Thermocouple (T/C) : industry
standard thermocouple types J, K, T, E, B,
R, S, N, C (ITS-90).
Pt100: Excitation 180uA. 2 or
3 wire connection (ITS-90 a =0.00385).
Voltage: -60mVdc to 60mVdc or
10Vdc to 10Vdc.
Current : 0-24mAdc
Accuracy
Refer to Table 1 Input Signal
A/D
Resolution
16 bits
Input
Sampling Rate
<200ms
Power
Supply
DC 24V
Output
Current Output: 4~20mA( Resistive
load 600O max.)
Continuous Voltage Output: 0~50mV;
0~10V( Resistive load 600O min.)
Note 1 : Accuracy is not guaranteed between 0 and 400°C (0 and 752°F) for type B.
Note 2 : The internal DIP switch should be set.
Dimension:
Wiring Diagram:
Ordering Information:
The standard unit is supplied set for thermocouple/PT100 inputs.
The converters are otherwise user configurable.
Should you require that the factory set the inputs and ranges the full code must be specified
was born.
ISC Dual Channel Isolated Signal Conditioner/Converter
Programmable for various input signals and
High accuracy in total ambient temperature range. 
Din Rail converter is user configurable using our 
